VGA OUTPUT TO HIGH RESOLUTION DIGITAL TV:

VGA connection produces much better effect than S terminal connection; with VGA cable, you can easily use TV as the second monitor, which gives out levels higher effect. But at premises, you should have VGA port, as well as a double VGA video adapter.
If your video adapter is such mode, you can get a VGA cable for the connection. But most video adapter is available for VGA + DVI output, you can get a DVI to VAG connector in addition to a VGA cable.



If your TV contains component video connection port, you can experience high quality media; with a VGA to component video cable to connect the TV, you will obtain wonderful effect!


??

The figure shows the ports behind a high resolution TV.




VGA to component video function


Product function: this cable is widely used for conversion between VGA (video graphic array) and component video signal, suitable forD-SUB 15 PIM/RCA port of a variety of electric equipment, e.g. the connection cable for computer, high resolution DVD and projector, high resolution TV, back-projection TV, plasma TV.

usb stick undelete	free usb flash drive recovery	data leakage protection
files recovery software	file recovery tool	recover deleted folder
xd sd cards recovery	spy keylogger	computer spying

Application scope: Signal transfer from VGA port to component video port.
NOTE:
1. This is used only when the video equipment such as TV, projector contains component video port (RCA port with a RGB group).
2. To connect the computer with video equipment such as TV and projector, the it is necessary that the video adapter supports video component output, and which only is ATI video adapter; the details about the models are as follows.
ATI official document listed the modals that support YPbPr signal output, including Radeon 8500, Radeon 9500, Radeon 9600, Radeon 9700 and Radeon 9800.
If your ATI Radeon does not contain a DVI port, you should get a VGA to 3RCA cable.VGA to 3RCA cable is used for connect the VGA connector of the video adapter to the video component connector of the display equipment, such as a TV.
If your ATI Radeon contains a DVI connector, you also need a DVI-I to VGA connector in addition to a VGA to 3RCA cable. Because the YPbPr signal will be output from DVI-I connector on such video adapter, you need a DVI-I to VGA connector to connect VGA to 3RCA cable.
As a matter of course, you surely can not enjoy the video without sound. Find the audio cable shipped with your machine, connect one end to the Audio out port of your audio adapter, connect another end to the relevant audio input port of the TV, so every thing is OK. However, this produced trouble when you use your computer, so you can get a 3.5 1 to 2 connector or conversion cable, insert the male connector to the audio adapter, the two ends of 1 to 2 connector connects the TV audio input and computer speaker respectively.

  OUTPUT TO WMV FILE

1. Click Output in the function bar, where select "Output settings(C)" item.

   

2. In the Output setting window, select WMV encoding output: (Note: the setting is validated only after the software is restarted)

   

3. Click Output in the function bar, where select WMV Encoding settings  item.

   

4. As shown in the figure, select Save to file.

   

OUTPUT TO AVI FILE

1. Click Output in the function bar, where select "Output settings(C)" item.

   

2. In the Output setting window, select AVI encoding output: (NOTE: the setting is validated only after the software is restarted)

   

3. Click Output in the function bar, where select "AVI output settings" item.

   

4. Set AVI saving path and size. (NOTE: the software automatically give a name to the AVI file, setting the path alone is enough. If the path does not exist, you can not save the file)

   

«