Midi2Wav recorder enables selection of sample rate, resolution, channels or wave file formats

Midi2Wav recorder: Playback Statistics displays wave field information with sample value

Introduction

MIDI to WAV, MP3 Conversion

›	Choose Conversion Mode
›	Convert MIDI to WAV, MP3, WMA
›	Setting Format of New Waveform
›	Select Wave Input Device
›	Mix MIDI Playback or Microphone Input
›	Test MIDI to Wave Recording
›	Record Statistics
›	Batch Conversion
›	MP3 Settings

MIDI Player

MIDI Track Setting

WAV Player

Playback Statistics

File Info

The File Info field of Wave panel displays the following information about loaded file:

Size – the size of loaded file in Kb (bytes), Duration – duration of loaded file in Min:Sec:Ms, and Sample Rate, Resolution, Channels – the format of the loaded wave and simultaneously the current record format.

create barcode	recover xd pictures	disabling usb drives
sd card recover deleted files	blank purchase order form	free sms gateway
windows installer setup	undelete freeware	undelete data recovery

PlayBack Statistics

After playback is over the Wave Statistics field displays the following information:

Max Volume is the absolute maximum sample value given in decibel form. The signal values range from –70db (soft) to 0db (loud).
Average Volume represents the average volume of the entire recording.
Max Signal is the absolute maximum sample value of the recording. The value 0% signifies the absence of signal (silence) and the value 100% signifies maximum possible signal.
Clipping The warning of possible clipping appears in this field if the amplitude of the sampled signal gets too high, such that a 16-bit (8-bit) number is not large enough to represent it. In this case the signal is clipped (cut off) at the maximum value. Clipping can cause clicks, pops, and distortion of the original sound.