Equalizer

Each deck has a high gain and high attenuation ten band equalizer. To alter the gain or attenuation
of any of the ten center frequencies, left click the mouse on the slider controls and drag them to the
desired position.

Because the equalizer has a high gain, tracks that have a high recording level can distort if the equalizer is set too high. Tracks that have a low recording level can be greatly improved with the high gain equalizer.

The 12khz and 14khz bands are only active for tracks with sample rates equal to or higher than 44.1khz.

The 16khz bands are only active for tracks with sample rates equal to or higher than 48khz.

If the sample rate is too low for an EQ band, the following warning will be displayed -

Presets

The equalizers on both decks have four presets each. Press EQ PRESETS to display the preset buttons.

To display the settings stored in a preset, move the mouse over it. The equalizer will display the settings stored in the preset.

To select a preset, press it.

To store the equalizer settings in a preset, press STORE then press the preset you wish to use.